With multiple CANbus interfaces, ignition signal input control for on/off power function, and a 3-axis accelerometer, the DynaGATE 15-10 integrates specific capabilities necessary in the demanding transportation and automotive environments.
Operations teams can manage the DynaGATE 15-10 through the web interface for easy configuration or through the Remote Device Management function of the Everyware Device Cloud full M2M solution from Eurotech. Both options, either with the Everyware Cloud service or independent of it, make the DynaGATE 15-10 fast to deploy and upgrade over time.
While web configuration is similar to consumer gateway and router products, the design and ruggedization of the hardware means the DynaGATE 15-10 is built to withstand shock, vibration, dust and water penetration. Multiple certifications attest to the strength and longevity of the physical unit.
With integrated support for Cellular, Wi-Fi, GPS and 802.15.4/Zigbee, DynaGATE 15-10 provides a powerful combination of interfaces for a broad range of communication connectivity environments. In the facility, Wi-Fi or other near-range wireless options allow data transfer or configuration functions, while cellular and GPS options enable vital communication when vehicles are in motion.
Transportation – Shock and vibe tested, extended temperature operation and ignition switch power supply control make DynaGATE 15-10 ideal for rail, bus, trucking and other transportation applications
Seamless Integration – Builds upon integrated Quark processor hardware and software building blocks offered in Intel® Gateway Solutions for the Internet of Things (IoT), with Everyware Software Framework (ESF) support to extend capabilities further, including remote device management and Java programmability
M2M and IoT (Internet of Things) Building Block – Ideally suited for M2M and Internet of Things applications to connect sensors, actuators and devices to the operations center for decision making based on real data. Native interface to Eurotech Everyware Device Cloud M2M integration platform for fast service development and deployment
CPU
Intel® Quark SoC X1020D, 400Mhz
Memory
Single Rank – Memory Down, 512 MB, DDR3L-1600
SD Card
8 GB Class 4 MicroSD
BIOS
8 MB SPI Boot Flash
I2C
3-axes, accelerometer
Wireless
GPS – Yes
WIFI – A/B/G/N
CELLULAR – Integrated via mPCIe Slot
BLUETOOTH – Yes
Interface
USB 3x back panel USB 2.0 ports Host Ports 1x back panel USB 2.0 Device Port
ETHERNET 2x 10/100 Base-T Ports
1x per TI 83848 PHY
SERIAL 1 x RS232 Console
GPIO 4 xGPIO
CAN 1 x CAN2.0B, up to 1 MB/s
1 x CAN2.0B, up to 250kbit/s
AUDIO Stereo Digital Mic Input
Stereo Analog Differential Mic Inputs
Stereo Line Out
INPUTS 8 channel LSADC back panel port
Power Supply
100 to 240 VAC, 47 to 63 Hz, and 12V DC, 0.4 Amp
Power Consumption
5W Max
OS Support
Yocto Linux, Intel Gateway Solutions for IoT ready
ESF Ready
Yes
EDC Ready
Yes
Dimensions
7.95” x 5.47” x 2.13” (L x W x H)
Operating Temperature
-40° to +80°C
Storage Temperature
-40° to +85°C ambient outside enclosure
Humidity
0 to 95% Non-Condensing
Compliance
FCC/CE